GENPROPLASTUHMW - PE300-PE500-PE1000

PE300-PE500-PE1000

TO BE CLEAR, POLYETHYLENE PE 300 HAS A MOLAR MASS OF AROUND 300 000 G/MOL AND IS A SUBSTANCE THAT IS HARD TO THE TOUCH, REASONABLY FLEXIBLE, AND HAS A HIGH DEGREE OF TOUGHNESS. PE 300 MATERIAL JOINS WELL DURING WELDING BECAUSE OF THE AFOREMENTIONED COMPARATIVELY LOW MOLAR MASS (IN CONTRAST TO THE ABOVEMENTIONED HIGH-MOLECULAR KINDS PE HMW 500 000 G/MOL AND PE UHMW ROUGHLY 5 MILLION G/MOL). IT'S CHALLENGING TO WELD PE 500 MATERIAL, AND FOR THE EP 1000 IT'S ALREADY ALMOST IMPOSSIBLE.

ORGANIC SOLVENTS, ACIDS, CAUSTIC SODA (NAOH), THINNERS, FRUIT JUICES, WATER, AND FAT WON'T HARM PE HD 300. HOWEVER, IT IS NOT RESISTANT TO HYDROCARBON DERIVATIVES THAT ARE AROMATIC OR CHLORINATED. POLYETHYLENE IS PHYSIOLOGICALLY SAFE AND CAN COME INTO DIRECT CONTACT WITH FOOD AND LIQUIDS. WE CAN CONFIRM COMPLIANCE WITH EU AND FDA (FOOD AND DRUG ADMINISTRATION) REGULATIONS FOR INTERMEDIATES THANKS TO THE NATIONAL INSTITUTE OF HYGIENE'S APPROPRIATE SANITARY CERTIFICATE.

HMWPE AND UHMWPE PLATES PERFORM SIGNIFICANTLY BETTER THAN HDPE 300 IN TERMS OF :

DAMPING
WATER ABSORPTION
EASE OF PROCESSING
ANTIADSHESIVENESS
ABRASION RESISTANCE
RADIATION RESISTANCE
COEFFICIENT OF FRICTION
LUBRICATING PROPERTIES
HIGH SURFACE RESISTANCE
SELF-LUBRICATING ABILITY
RESISTANCE TO SCORING, GROOVING
HIGH CAPACITY TO PREVENT STICKING OF MATERIALS
STIFFNESS (MODULUS OF ELASTICITY EG FOR EP 500 1000 MPA INSTEAD OF 800 MPA FOR PE 300)
NOTCHED IMPACT STRENGTH (UP TO DIN EN ISO 179 PE 300 – 12 KJ/M2, PE 500 – 50 KJ/M2, PE 1000 – 200 KJ/M²)
ZAPPLICATION TEMPERATURE RANGE (IN °C RESPECTIVELY FOR PE 300 –50 ÷ +80, PE 500 -100 ÷ +80, PE 1000 -260÷ +80)

USE CASES OF PE HMW 500 AND PE UHMW 1000 HIGH MOLECULAR WEIGHT EXTRUDED AND MOLDED PLATES :

PLASTICS BEARINGS
SPROCKETS, GUIDES
BULK MATERIALS INDUSTRY
CANNING LINES AND BOTTLERS
UNDERCOATS FOR CORE CUTTERS
PAPER, PRINTING, TEXTILE INDUSTRY
SPORTING ARTICLES FOR USE IN WATER
SIEVES, COLANDERS, PRESSES (EG. PAPER INDUSTRY)
STORES WITH COLD DOORS, REFRIGERATORS, AND RUBBING STRIPS
COMPONENTS OF THE BOXING, SORTING, PACKAGING, AND PACKING LINES
CHEMICALLY RESISTANT PUMP COMPONENTS (CASINGS, IMPELLERS), FANS, FILTERS
PROTECTIVE AND SLIDING FENDERS, FENDER MOLDINGS, FOR SHIPS AND BOATS IN PORTS, SHIPYARDS
SELF-LUBRICATING GEARS, GUIDES, SLIDES, BEARING HOUSINGS, PLAIN SLEEVES, GEARS, MACHINE PARTS AND COMPONENTS
LINING OF CHAINS, RAMPS, BLEED, HOLD, TRANSFER STATIONS (SAND, COAL, GRAIN, AND OTHER BULK MATERIALS), SILOS, WAGONS, AND TRUCK TRAILERS
PARTITIONING TABLES, COUNTERTOPS, AND CHOPPING BOARDS PE, BUTCHER BLOCKS, LOGS, AND SHOPS OF MEAT PROCESSING, POULTRY, AND FISH IN THE MEAT INDUSTRY AND FOOD